The Stump Grinder Guarding System is designed to help reduce the risk of flying debris.
This system consists of 3 individual panels each 112cm high by 104cm wide and weighing 4.2kg (total guard weight 12.8kg including connection clips). When all 3 panels are connected you will have created a guard that is 3.12m in length.
The panels are connected together by quick release clips which allows you to add and subtracted extra panels with ease to create a custom sized Guarding System.
Each of the frames is covered in a durable double layered close knit black mesh allowing wind to pass through.
This product is primarily designed for use outdoors so the steel frame is fully Powder Coated to help prevent the inset of corrosion and to prolong the products life.
- Each system consists of 3 panels
- Each frame is covered in a durable double layered close knit black mesh allowing wind to pass through
- Metal press stud fittings & Velcro securing the mesh
- The panels are connected together by quick release clips which also double as a height variable hinge
- Panels can be carried with ease
- Panels can be added and subtracted to create a custom sized Guarding System
- Large skirt around base to retain debris from going under the system
It is not possible to cover every eventuality relating to the use of this equipment. Purchasers and users of this product should seek professional training from a fully qualified and competent instructor prior to engaging in any activity. If you are not able, or not in a position to assume this responsibility, do not use this product. The manufacturer its distributors and retailers do not accept any liability if users do not follow the instructions correctly. Only the techniques shown in the diagrams are authorize. Any other use deviating from those shown may result in serious injury or death.
We cannot guarantee that this product will stop all flying debris. The manufacturer its distributors and retailers cannot be held responsible for any damage which may occur when using this product. It is the responsibility of the operator to create a safe working environment and assess the correct use and positioning as part of their Risk Assessment. Further guarding maybe required over and above the Guard System.
As part of any method statement we recommend that all users of this equipment must be given a copy of these instructions. They must read them, understand them and explicitly follow all instructions and cautions attached. Any person using this equipment should be fully trained and competent in its use.