ANSI Z87, EN 1731 & AS/NZS 1337.2:2012
0.3 mm ligatures
0.7 mm hole
0.3 mm material thickness
56.20 grams weight
Mesh Hole Size
Standard: 0.7 mm
When stored and maintained at ambient temperatures, this product will last in excess of two years, but must be inspected thoroughly prior to use. Any product showing signs of deterioration or damage should be replaced.
Check for damage and broken parts prior to use. Broken parts must only be replaced by a competent person. Position the SAFE-EYES™ product over the eyes, securing with the strap piece. Pull the strap retaining clip (green) forward and adjust the strap to ensure the SAFE-EYES™ are secure, re-position the clip. Note that there should be no gap between the product frame and the face.
Wash in warm soapy water and rinse with clean water. Allow the product to dry naturally, do not force dry.
Disinfect when necessary using a mild household or medical detergent, rinse thoroughly with clean water. Allow the product to dry naturally, do not force dry. For full instructions download our Instructions Sheet.
This product is intended for protection against fine to medium particles. This product is not intended to give protection from ultra-violet or infrared radiation, including sunlight. This product does not protect against molten metal, hot solids or electrical hazards. Safe Eyes® are manufactured by Green Delta, Hong Kong.